LM-79 Testing Laboratory | LM 79 Testing Labs – KC India

LED-based solid-state lighting (SSL) products offer many advantages over incandescent lamps, but they present unique challenges for performance measurements. LM-79 was developed by the Illuminating Engineering Society (IES) to standardize the photometric and electrical measurements of LED-based SSL products and is the benchmark test for lighting manufacturers and numerous qualification programs.

LM 79 Testing Labs


KC India testing laboratory is ISO accredited by A2LA for LM-79 luminous flux (lumen) and color measurements.

KC India is also a Design Lights Consortium (DLC) approved LM-79 testing laboratory for lamps and luminaires.

Quick Lumen and Color Testing for Small and Large Luminaires

2-meter integrating sphere system equipped with high-precision spectro radiometer and integrated power management

Up to 52" wide LED luminaires in 4pi configuration with omni-directional standard lamp

Up to 24" wide LED luminaires in 2pi configuration with special forward flux standard lamp

TM-30 color calculations are also available as part of our LM-79 test reports

Photosynthetically Active Radiation (PAR) measurements for LED horticultural and grow lighting

Do you need a realiable testing partner for LM-79 testing and luminaire qualification? Contact us today to experience the KC India expert engineers, responsive scheduling, and trusted results.

Complete Luminaire Testing in One Location

KC India powerful combination of EMI/EMC, Environmental Stress, Photometric, and Wireless testing services help lighting manufacturers successfully validate every aspect of their products in one location.

FCC Part 15 RF Emissions Testing and TCB Certification for LEDs and Controls

CE Mark Compliance to EMC, Low Voltage, and Radio Equipment Directives

ANSI C136.31 Vibration Testing for Roadway Luminaires

IEC 60529 Ingress Protection (IP) Testing for Water and Dust

MIL-STD-810 Temperature and Humidity Exposure

ISTA Certified Test Laboratory for Product Packaging Validation

Electric Power/Utility-Grade Surge and Transient Protection Testing

Full-service Machine Shop to Design and Fabricate Custom Fixtures and Automation Solutions

LM 79 Testing labs | Vibration Testing Labs | IP Testing Labs | EMC Testing Lab

Location: India

Comments

Post a Comment

Popular posts from this blog

Ingress Protection testing (IP) Testing Labs

Image
Ingress Protection testing (IP) Testing Labs   Ingress Protection testing , or IP testing Lab , determines a product's susceptibility to solid particle ingress (sand or dust) as well as water ingress. The value of trusting Element with your Ingress Protection (IP) testing is clear. Working with our leading Engaged Experts and unrivaled portfolio of testing operations and capacities enables our clients to validate certainty in their products and confidence to go to market quickly and safely, working with a global single source partner. What is Ingress protection (IP)? Ingress protection ratings or IP ratings refer to the level of protection offered by an electrical enclosure, against solids and liquids. In an environment where dust or water could damage electronic components, a sealed enclosure is used to prevent such ingress and safe house the electronics. They are commonly used for applications which may be exposed to the elements, as well as dust or moisture. Typical i
Read more

Vibration testing laboratory in Delhi NCR

Image
V ibration testing Lab is accomplished by introducing a forcing function into a structure, usually with some type of shaker. Alternately, a DUT (device under test) is attached to the "table" of a shaker. Vibration testing Labs is performed to examine the response of a device under test (DUT) to a defined vibration environment. The measured response may be ability to function in the vibration environment, fatigue life, resonant frequencies or squeak and rattle sound output (NVH). Squeak and rattle testing is performed with a special type of quiet shaker that produces very low sound levels while under operation. For relatively low frequency forcing (typically less than 100 Hz), servo hydraulic (electro hydraulic) shakers are used. For higher frequencies (typically 5 Hz to 2000 Hz), electrodynamics shakers are used. Vibration Testing laboratory Vibration Testing Lab and Its Process Vibration testing is the process of evaluating the performance or degradation of a product,
Read more

Best LM 79 Testing Labs

Image
  Best LM 79 Testing Labs all NABL and BIS Approved lab As the expansion of LED Testing technology continues to fatten and enlarge, the need for compatible and standardized testing procedures for LED has become more ubiquitous than ever. So, IESNA has come with LM 79   Testing Approved Method to measure the electrical, photometric and colorimetric parameters of SSL Products like luminaries, lamps, tube lights, bulbs, flood light, street light, down light, panel light and all types of LED , OLED products. LM Testing Labs 1. Electrical parameters - Current, Voltage, Power Factor, Frequency 2. Photometric parameter- Luminous flux, Efficiency, Light intensity distribution in candela) 3. Colorimetric parameters - CCT, CRI, X Y coordinates LM 79 testing Labs will be performed by recognized Laboratories and the reports issued from such labs are relevant. All NABL and BIS Approved lab for can perform LM 79 testing. The Equipment that is required for LM 79 Testing the INTEGRATING
Read more