KC India One Of The Best LM 79 Testing Lab in India

LM-79 testing measures the performance of products that use solid-state lighting (SSL) technology, such as light-emitting diodes (LEDs). This testing provides a snapshot of performance under specified operating conditions at some point in a product's life, typically at the start of operation—these are known as initial measurements. It makes no mention of lifetime ratings, changes in performance over time (for example, lumen maintenance), or LED case temperature. The LM-79 method can be used on integrated LED products like luminaires and replacement lamps. It doesn't apply to LED packages, modules, or arrays (herein collectively referred to as LED light sources).

LM 79 test lab


LM-79 data allows for objective product comparisons and evaluation in relation to performance requirements. Although LM-79 does not specify a report format or minimum content, it does provide a lengthy list of "typical items reported." Electrical characteristics, lumen output, spatial distribution of light, and colour attributes are among the key types of measurements addressed in the test report.

We have an in-house testing facility at KC India that can test and issue a full report of IES LM 79 Testing for our customers. The test is carried out in accordance with IES manuals and procedures. For more information, please contact one of our sales representatives.

LM 79 testing Labs | LED Testing Labs | EMC Testing Lab | IP Testing Lab

Comments

Post a Comment

Popular posts from this blog

Best LM 79 Testing Labs

Image
  Best LM 79 Testing Labs all NABL and BIS Approved lab As the expansion of LED Testing technology continues to fatten and enlarge, the need for compatible and standardized testing procedures for LED has become more ubiquitous than ever. So, IESNA has come with LM 79   Testing Approved Method to measure the electrical, photometric and colorimetric parameters of SSL Products like luminaries, lamps, tube lights, bulbs, flood light, street light, down light, panel light and all types of LED , OLED products. LM Testing Labs 1. Electrical parameters - Current, Voltage, Power Factor, Frequency 2. Photometric parameter- Luminous flux, Efficiency, Light intensity distribution in candela) 3. Colorimetric parameters - CCT, CRI, X Y coordinates LM 79 testing Labs will be performed by recognized Laboratories and the reports issued from such labs are relevant. All NABL and BIS Approved lab for can perform LM 79 testing. The Equipment that is required for LM 79 Testing the INTEGRATING
Read more

Vibration testing laboratory in Delhi NCR

Image
V ibration testing Lab is accomplished by introducing a forcing function into a structure, usually with some type of shaker. Alternately, a DUT (device under test) is attached to the "table" of a shaker. Vibration testing Labs is performed to examine the response of a device under test (DUT) to a defined vibration environment. The measured response may be ability to function in the vibration environment, fatigue life, resonant frequencies or squeak and rattle sound output (NVH). Squeak and rattle testing is performed with a special type of quiet shaker that produces very low sound levels while under operation. For relatively low frequency forcing (typically less than 100 Hz), servo hydraulic (electro hydraulic) shakers are used. For higher frequencies (typically 5 Hz to 2000 Hz), electrodynamics shakers are used. Vibration Testing laboratory Vibration Testing Lab and Its Process Vibration testing is the process of evaluating the performance or degradation of a product,
Read more

Ingress Protection testing (IP) Testing Labs

Image
Ingress Protection testing (IP) Testing Labs   Ingress Protection testing , or IP testing Lab , determines a product's susceptibility to solid particle ingress (sand or dust) as well as water ingress. The value of trusting Element with your Ingress Protection (IP) testing is clear. Working with our leading Engaged Experts and unrivaled portfolio of testing operations and capacities enables our clients to validate certainty in their products and confidence to go to market quickly and safely, working with a global single source partner. What is Ingress protection (IP)? Ingress protection ratings or IP ratings refer to the level of protection offered by an electrical enclosure, against solids and liquids. In an environment where dust or water could damage electronic components, a sealed enclosure is used to prevent such ingress and safe house the electronics. They are commonly used for applications which may be exposed to the elements, as well as dust or moisture. Typical i
Read more