LM-79 Testing Labs

LM-79 Testing Laboratory in India

KC India Ghaziabad (UP) is a accredited laboratory through NABL under photometry testing providing LM-79 Testing. It has a scope to test Solid state lightning luminaries for total luminous flux, efficacy, CCT, CRI, color coordinates and LID.










Why to go for LM-79 Testing?

If You are a manufacturer or vendor and want to sell your product in the market. Then you must be needed a test report of your product which will give all the parameters electrical and photometric measurement issued by an NABL accredited laboratory KC India LM 79 testing will give you a chance to improve your product by amendment in it if required. So, Testing LED luminaries are a necessary task to be performed in this competitive world.

LM-79 Test Photometric Results:

Colorimetric Parameters:
Chromaticity coordinates: (Chroma x / Chroma y / Chroma u(u’) / Chroma v / Chroma v’)
Correlated Color Temperature (CCT)
Duv Value
Color Ratio
Peak Wavelength (nm)
Half Bandwidth (nm)
Dominant Wavelength (nm)
Color Purity
Color Rendering Index (CRI – Ra)
Photometric Parameters:
Total Luminous Flux (Lumens)
Luminous Efficacy (Lumens/Watt)
Radiant Power (Watts)
Electrical Results:
Input Power (Watts)
Input Voltage (Volts )
Input Current (Amps)
Power Factor
Input Frequency (Hz)
Additional Parameters:
Stabilization Time (Light and Power) = 60 minutes
Test Geometry Configuration = 4π
Spectroradiometer = (Lisun LMS-9000A Plus)
Ambient Temperature = 25.0°C

LM 79 Test Labs – LM 79 Testing Laboratories – KC  India

Get introduced to the best place which is KC India for LM 79Testing Labs where you can have the best result for LM 79 Testing. Call on 9599880268 for LM 79 Testing laboratories.

LM 79 Testing Lab | LM 79 Testing Labs | LM 79 Testing Laboratory




Comments

Post a Comment

Popular posts from this blog

Ingress Protection testing (IP) Testing Labs

Image
Ingress Protection testing (IP) Testing Labs   Ingress Protection testing , or IP testing Lab , determines a product's susceptibility to solid particle ingress (sand or dust) as well as water ingress. The value of trusting Element with your Ingress Protection (IP) testing is clear. Working with our leading Engaged Experts and unrivaled portfolio of testing operations and capacities enables our clients to validate certainty in their products and confidence to go to market quickly and safely, working with a global single source partner. What is Ingress protection (IP)? Ingress protection ratings or IP ratings refer to the level of protection offered by an electrical enclosure, against solids and liquids. In an environment where dust or water could damage electronic components, a sealed enclosure is used to prevent such ingress and safe house the electronics. They are commonly used for applications which may be exposed to the elements, as well as dust or moisture. Typical i
Read more

Vibration testing laboratory in Delhi NCR

Image
V ibration testing Lab is accomplished by introducing a forcing function into a structure, usually with some type of shaker. Alternately, a DUT (device under test) is attached to the "table" of a shaker. Vibration testing Labs is performed to examine the response of a device under test (DUT) to a defined vibration environment. The measured response may be ability to function in the vibration environment, fatigue life, resonant frequencies or squeak and rattle sound output (NVH). Squeak and rattle testing is performed with a special type of quiet shaker that produces very low sound levels while under operation. For relatively low frequency forcing (typically less than 100 Hz), servo hydraulic (electro hydraulic) shakers are used. For higher frequencies (typically 5 Hz to 2000 Hz), electrodynamics shakers are used. Vibration Testing laboratory Vibration Testing Lab and Its Process Vibration testing is the process of evaluating the performance or degradation of a product,
Read more

Best LM 79 Testing Labs

Image
  Best LM 79 Testing Labs all NABL and BIS Approved lab As the expansion of LED Testing technology continues to fatten and enlarge, the need for compatible and standardized testing procedures for LED has become more ubiquitous than ever. So, IESNA has come with LM 79   Testing Approved Method to measure the electrical, photometric and colorimetric parameters of SSL Products like luminaries, lamps, tube lights, bulbs, flood light, street light, down light, panel light and all types of LED , OLED products. LM Testing Labs 1. Electrical parameters - Current, Voltage, Power Factor, Frequency 2. Photometric parameter- Luminous flux, Efficiency, Light intensity distribution in candela) 3. Colorimetric parameters - CCT, CRI, X Y coordinates LM 79 testing Labs will be performed by recognized Laboratories and the reports issued from such labs are relevant. All NABL and BIS Approved lab for can perform LM 79 testing. The Equipment that is required for LM 79 Testing the INTEGRATING
Read more